High-temperature steam (water) - water plate heat exchanger Overview: The plate heat exchanger is a metal corrugated plate heat transfer surfaces, heat transfer medium flow path in the mesh between the plates through the critical Reynolds number is 200, in the lower under the influence of turbulent flow can be aroused, which can heat transfer, with high heat transfer efficiency, small footprint, easy maintenance. However, due to the impact plate heat exchanger thermal performance of the sealing material is confined to the use conditions below 180 ℃. Shell and tube heat exchangers, although large area, low heat transfer efficiency, but a wide range of applications, can be used in high-temperature, high-pressure situations, for which the company developed a high-temperature steam - water heat exchanger. Such a heat exchanger to heat exchanger plate heat exchanger in the hot areas to be applied. High-temperature steam - water heat exchanger uses two methods, cooling device (shell and tube swap execution device) with a combination of plate heat exchangers, namely: the first is the use of heat exchangers for high temperature heat exchanger cooling device, the first Sec is the use of low-temperature heat exchanger plate heat exchanger segment. Other (1) steam - water heat exchange into the superheated steam into the cold section of the plate heat exchanger from the top corner hole, must take a single process. (2) generally in the high temperature section of the water flow rate of 1.0 ~ 2.2m / s, a flow rate in the low temperature section is 0.3 ~ 0.45m / s, the flow rate of the steam in the cold section is 10 ~ 15m / s. (3) the user's working parameters during performance table outside the parameter range, can contact me. (4) Refer to the corresponding specific dimensions of shell and tube heat exchanger series plate heat exchanger selection of samples and sample selection, or contact me, provided by the company.